Home/Trolley Hatches/Stainless Steel Trolley Style Pass Through Hatch with Glazed and Clamped Doors

Stainless Steel Trolley Style Pass Through Hatch with Glazed and Clamped Doors

This style of hatch is intended to be floor mounted and would have two framed doors, each glazed in either 6.4mm thick clear laminated glass or 6mm thick clear toughened safety glass, which open on surface mounted stainless steel cast hinges.

Download Spec Sheet
Category:

Description

  • This style of hatch is intended to be floor mounted and would have two framed doors, each glazed in either 6.4mm thick clear laminated glass or 6mm thick clear toughened safety glass, which open on surface mounted stainless steel cast hinges.
  • Each door is fitted down 1 edge with a rubber edging seal which allows the doors to be clamped closed by the action of turning the knobbed lever, on the door, until it locates and slides into the angled receiver on the outside face of the hatch.
  • The doors are interfaced with a mechanical interlock which prevents them both being opened together. This is independent of the door lever turn (clamp).
  • The hatches are supplied complete with 2 no. 3 sided installation flanges to assist in securing it within a wall as well as bumper strips/thresher plates, which are secured just under and inside each door to act as location points for trolleys being pushed into the Hatch (not compulsory).
WARRANTY:
12 months excluding glass from date of delivery.